The Saginaw Control & Engineering SCE-72P30F1 is a back panel used to mount/install electrical components to without having to install them directly onto the enclosure walls for Saginaw Free Standing Enclosures.

• Carbon Steel Material
• Thickness: 0.88
• Finish: Painted White
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-72FSCPS is center panel support designed to be installed in any Saginaw 72" tall free standing two-door enclosure.

• Powder Coated Steel

The Saginaw SCE-8C12ELJSS is Designed to house electrical and electronic controls, instruments, and components. Suitable for washdown environments and also provides protection from dust, dirt, oil and water.

• Hinged (Single Door)
• 304 Stainless Steel
• NEMA Type 3R, 4, 4X and 13

The Saginaw Control & Engineering SCE-90P72F1GALV back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Full Galvanized Steel Material
• Thickness: 0.88
• Finish: Galvanized
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-DLSBPA is a quarter-turn latch used to provide additional security and managable access for Saginaw enclosures.

• Compatible with Saginaw Control & Engineering NEMA 1 enclosures

The Saginaw SCE-FK1212 Floor Stand Kit is designed to be installed on most wall mounted enclosures with a width of 20" or more.

• 12 x 12" (H x W)
• Painted Steel (ANSI 61 Gray)
• Maintains NEMA 3, 3R, 4 or 12

The Saginaw Control & Engineering SCE-72P24F1 back panel is used to mount/install electrical components to without having to install them directly onto the enclosure walls. Making the process of swapping out or updating the electronics in your enclosure quicker and easier.

• Carbon Steel Material
• Thickness: 0.88
• Finish: Painted White
• Compatible with Saginaw Control & Engineering series enclosures.

The Saginaw Control & Engineering SCE-DS24SS Drip Shield is designed to protect door hardware against dripping water and settling dust. Stainless steel screws and sealing washers are supplied with kit.

• 304 Stainless Steel

Saginaw SCE-LF18NO LED light fixture is designed to provide interior lighting for an enclosure. Can be mounted to 1/4-20 Studs in the top of Free standing enclosure or on the front flange of most enclosures. Door activated adjustable switch, switch can be removed and relocated.

• 4000K Frosted White
• 100 to 240 VAC

The Saginaw SCE-12C12ELJSS is designed to house electrical and electronic controls, instruments, and components. Provides protection from dust, dirt, oil and water. Consolets can be mounted on either of two sides to give a control surface inclined at 30 or 60 degrees. Can be mounted on desks, machines, or pedestals.

• Hinged (Single Door)
• 304 Stainless Steel (#4 brushed finish)
• NEMA Type 3R, 4, 12 and 13