Accessories

Thermocouple Cable Extension Connector Kit for Raytek CM or CI1 sensors that use Type J Thermocouple.

Thermocouple Cable Extension Connector Kit for Raytek CM and CI2 sensors that use Type K Thermocouple.

The Fluke EDBC290 is an extended dual-bay battery charger designed for use with the BP291 and BP290 rechargable batteries.

Fixed Mounting Bracket for Raytek CI, CM Infrared Sensors

Fixed Mounting Bracket for Raytek MI3 Infrared Sensors

The Fluke FLK-TI-TRIPOD3 is a one-piece mounting accessory quickly and easily attaches to your Ti400, Ti300 or Ti200 Infrared Camera and allows you to mount to a standard tripod or monopod for those applications or situations that require a more stable or semi-fixed platform.

The Fluke i17XX-flex6000/4pk iFlex flexible current probes expand the measurement range of the Fluke 17XX Energy or Power Logger to 6000 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the energy logger, displaying current measurements without error prone scaling factors.

• Pack of 4

The Fluke i40s-EL/3pk is used for low current measurement; suitable for making measurements up to 40A, and also measures accurately on 1A and 5A secondary current transformers. The i40s-EL jaw is capable of being clamped on current conductors up to 15mm in diameter.

• Pack of 3

The GPC temperature monitor provides a compact easy to use interface and display for process intruments, comes with 3A mechanical alarm outputs, fully isolated electrical inputs and outputs.

• Outputs: 4-20 mA, Type J, Type K, Type E, Type N, Type R, Type S, Type T

The GPC temperature monitor provides a compact easy to use interface and display for process instruments, comes with standard 5 VDC alarm outputs.

• Outputs: 4-20 mA, Type J, Type K, Type E, Type N, Type R, Type S, Type T

The protective protective window is designed for LT model Raytek MI3 sensors only and can be directly screwed to the sensing head.

• Window: Polymer (milky transparent, flat) / Body: Stainless Steel
• Transmission: 0.7 +/- 0.02
• T-Ambient: 65 C (149 F)

Raytek air purge jacket that is pre-installed onto a MI3-LTS or MI3-LTH Raytek Sensor. Used to keep dust, moisture, airborne particles,and vapors away from the sensing head. **Must be ordered with MI3 Sensor.

• Withstands ambient temperatures up to 180�C (356�F)
• Limited use for cooling purposes
• Recommended air flow rate is 30 to 60 l / min (0.5 to 1 cfm). (max. pressure is 5 bar)