Circuit Protection

Altech's 002560004 AC/DC Fuse Holder can be used to protect against overloads and short circuits of electric lines, for motor protection and control and for the protection of electric installations.

• Without Status Indicator
• Current: 50 A
• Pole Configuration: 3P
• 14x51mm Fuse Type

Altech's 002560014 AC/DC Fuse Holder can be used to protect against overloads and short circuits of electric lines, for motor protection and control and for the protection of electric installations.

• With Status Indicator
• Current: 50 A
• Pole Configuration: 3P
• 14x51mm Fuse Type

Altech's 002540201 DC Fuse Holder can be used to protect against overloads and short circuits of electric lines, for motor protection and control and for the protection of electric installations.

• Without Status Indicator
• Current: 25 A
• Pole Configuration: 1P
• 10x38mm Fuse Type

Altech's 002540211 DC Fuse Holder can be used to protect against overloads and short circuits of electric lines, for motor protection and control and for the protection of electric installations.

• With Status Indicator
• Current: 25 A
• Pole Configuration: 1P
• 10x38mm Fuse Type

Altech's 002550201 DC Fuse Holder can be used to protect against overloads and short circuits of electric lines, for motor protection and control and for the protection of electric installations.

• Without Status Indicator
• Current: 25 A
• Pole Configuration: 1P
• 10x38mm Fuse Type

Altech's 002550203 DC Fuse Holder can be used to protect against overloads and short circuits of electric lines, for motor protection and control and for the protection of electric installations.

• Without Status Indicator
• Current: 25 A
• Pole Configuration: 2P
• 10x38mm Fuse Type

Altech's 002550211 DC Fuse Holder can be used to protect against overloads and short circuits of electric lines, for motor protection and control and for the protection of electric installations.

• With Status Indicator
• Current: 25 A
• Pole Configuration: 1P
• 10x38mm Fuse Type

Altech's 002550213 DC Fuse Holder can be used to protect against overloads and short circuits of electric lines, for motor protection and control and for the protection of electric installations.

• With Status Indicator
• Current: 25 A
• Pole Configuration: 2P
• 10x38mm Fuse Type

The Lovato P1X1011UH is a single pole C/O change over contact for Lovato P1MBU series miniature circuit breakers (Pack of 10).

• Compatible With: Lovato P1MBU Miniature Circuit Breakers
• Rated impulse withstand voltage Uimp: 4 kV
• Rated operational voltage AC (IEC): 400 VAC
• Rated current (In): 6 A
• Conductivity: 24V 10mA
• UL, cUL, IEC/EN/BS 60947-5-1

The Noark HOM1A is a handle operating mechanism designed for use on Noark M1 body Molded-Case Circuit Breakers.

• Fits M1 Type
• Hole Diameter: 10mm
• **Mechanism only, does not inlude shaft or handel

Lovato's FB01F1P AC Fuse Holder can be used to protect against overloads and short circuits of electric lines, for motor protection and control and for the protection of electric installations. This equipment can assure the disconnect function but is not suitable for isolation so cannot be used as switch disconnector.

• Compact size with standards for electrical equipment
• DIN rail mounting and removal ease
• Sealable cover in open or closed position

Lovato's FB01F1PL AC Fuse Holder can be used to protect against overloads and short circuits of electric lines, for motor protection and control and for the protection of electric installations. This equipment can assure the disconnect function but is not suitable for isolation so cannot be used as switch disconnector.

• Compact size with standards for electrical equipment
• DIN rail mounting and removal ease
• Sealable cover in open or closed position